Tetrion Fine Surface Filler Tube - 330g

SKU: TETTFS330

£8.99

Super smooth buttery filler

For very fine cracks and interior blemishes

Convenient for quick repair jobs - No dosing or mixing required

Water based non-shrink paste

Rapid sanding

Tetrion Fine Surface Ready Mixed Filler is designed to easily fill hairline cracks, wood grain and chips in paintwork. The super smooth buttery texture makes it incredibly easy to handle and apply to even the finest cracks and interior blemishes. Suitable for over-painting and rapid sanding capabilities means that this filler is the go to for anyone who needs a high quality fine surface finish.

330g Tube


ADVANTAGES

  • Super smooth buttery filler
  • For very fine cracks and interior blemishes
  • Convenient for quick repair jobs - No dosing or mixing required
  • Water based non-shrink paste
  • Rapid sanding
  • High strength polymer re-enforced
  • Over-paintable


APPLICATION

  • Ensure the surfaces are dry, clean and free from dust, grease and other contaminants
  • Sand down gloss surfaces to create a keyable base
  • Apply in a thin layer of no more than 2mm wide with a filling knife, pressing well into the area to be filled. Smooth off immediately with a wet blade
  • If necessary, Tetrion Fine Surface Ready Mixed Filler can easily be sanded down after approximately 30 minutes and then over-painted with most household paints
  • Over-paint with an oil-based paint when using externally
  • Dry To Sand: 30 Mins
  • Dry To Paint: 30 Mins
  • Undercoat: Yes - oil based if outside

After use:

  • Replace the cap to ensure the filler stays in good condition. Store away from frost.

Note: Tetrion Fine Surface Filler should be applied in layers of no more than 2mm. If the depth of the fill is greater than this a different filler from the range, such as Tetrion Woodfil, Tetrion Smart Filler or Tetrion All Purpose Filler should be used.

 

AVAILABILITY

330g - TFS330 (Tube)

600g - TFS606 (Pot)

Recently viewed