Tetrion Ready Mixed Woodfil - 600g








Tetrion Flexible Wood Filler is an easy-to-use, ready-mixed filler suitable for interior and exterior use. The filler bonds strongly to wood and leaves a water-resistant, super-smooth finish, which can be stained, varnished or painted. Tetrion Flexible Wood Filler is resistant to shrinking or cracking and is suitable for wood-filling repairs to doors, skirting boards, floor boards, window frames, nail holes, etc.



  • Super smooth and flexible
  • Shrinking and cracking resistant
  • Interior/Exterior Use
  • Easy sanding
  • Can be nailed or screwed
  • Rapid drying and low odor



  • Ensure surfaces are dry, clean and free from dust and loose materials. Remove all decayed wood down to dry, sound materials. Allow damp wood to dry completely
  • Stir filler thoroughly to form smooth paste
  • Apply with filling knife, pressing filler firmly into repair. Smooth off
  • Build up deep repairs in layers no more than 5mm. Allow each layer to dry thoroughly before applying next layer
  • Filler starts to set in approximately 2-3 hours, depending on the depth of the filler and temperature/humidity. Allow thicker layers (above 5mm) to set overnight
  • Once dry, sand smooth and paint, stain or varnish
  • After use, to keep remaining filler in perfect condition, replace plastic disc, cover with damp rag and reseal lid
  • Wash tools with warm water
  • Store away from frost

Note: Avoid using in wet or damp conditions. If rain or moisture is expected, cover repair with waterproof material until filler has fully set. Protect from temperatures below 5°C until set. Filler may stain/varnish differently to surrounding timber. Test on a small area to assess whether appearance is acceptable.



330g - WFN330

Recently viewed