Nilco Max Blast Air Room Sanitiser - 750ml | Case of 6 | £9.99 Each

SKU: BRGSVTN750DTS6PK

£71.93

Nilco Dry Touch Max Blast Sanitiser - 750ml

Nilbac® Dry-Touch Sanitiser MAX BLAST has been specially formulated to quickly and effortlessly sanitise entire rooms and cars in a few short burst.

An average room is between 18 to 22 square metres, the MAX BLAST can deliver 40mls of product per second which means the product can be applied in the average room in under 8 seconds.

Many viruses are spread through droplets which are expelled into the air when a person coughs or sneezes.

The Nilbac® fine mist gets to work straight away in the air and on contact with all surfaces to remove viruses, bacteria, yeasts, fungi and other harmful microorganisms that can damage health, leaving a clean, purified safe environment.

Sanitise The Whole Room In One... No Wiping ... Just Spray  - Commercial Strength Formula

Directions

Rooms and Large Areas

1. Shake can well, ensure the area to be treated is free from pets 
 
2. Always ensure the nozzle is pointing away from the body. A during the spraying process. A suitable face mask should be worn.
 
3. Keeping a distance of  1.5m from walls, surfaces and objects, spray the product in short bursts methodically over the area to ensure complete coverage.
 
4. Vacate the area and close all doors, allowing the products to settle throughout the area ideally overnight, or for a minimum of 10 mins.
 
5. After this time open doors and windows to allow any flammable vapours to disperse.
 
Vehicles
 
1. Shake can well, ensure the area to be treated is free from pets and people
 
2. Always ensure the nozzle is pointing away from the body. A during the spraying process. A suitable face mask should be worn.
 
3. Keeping a distance of 1.5m from seats, interior fixtures and surfaces, spray one short burst in the front seat of the vehicle and one in the back.
 
4. Vacate the area and close all doors, allowing the products to settle throughout the area ideally overnight, or for a minimum of 10 mins.
 
5. After this time open doors and windows to allow any flammable vapours to disperse.
 
N.B. Ideally, this product should be used after general cleaning when the area will not be used for several hours
 
Formulated to BS EN 1276 and BS EN 13697 and is effective against a wide range of bacteria and moulds including Pseudomonas Escherichia coli (E. coli), Staphylococcus aureus (Staph aureus) including MRSA strain, Enterococcus hirae (Ent. Hirae), Aspergillus niger, Candida albicans.

 This product is also suitable for the control of envelope Viruses and has been formulated to BS EN 14476:2013+A2:2019

WARNING: This product is highly flammable and extra caution should be taken to ensure all heat sources in the area are turned off and left to cool before use. A suitable mask should be worn during application. Please read the directions for use and the health and safety information printed on the can in full before use.

Patented Technology from Tetrosyl Limited.

Recently viewed